No hot water, or your hot water keeps tripping the power? We find the fault and repair the electrical side of electric storage hot water systems, including elements, thermostats and circuits.
Phones answered 24/7
Answered within 24 hours
Common faults
When the water runs cold, the cause is often electrical, and that's when you need a hot water electrician in Sydney rather than a plumber. Impulse Electrical Enterprise finds and fixes the electrical side, and these are the signs to look for.
If the water has gone completely cold, the cause is often a failed element or thermostat, a tripped circuit or a problem with the power supply. We test each one to find the fault.
Water that never gets properly hot, or runs out early, can point to a failing element or thermostat. If your system is on an off-peak supply, it only heats at certain times, which we check too.
If your hot water keeps tripping the safety switch or circuit breaker, there's a fault. Don't keep resetting it. Leave it off and call an electrician.
Older systems can have worn wiring or no safety switch on their circuit. We can upgrade the circuit and add a safety switch to make the system safer.
What we fix
Most electric hot water repairs come down to a failed element or thermostat, and both can usually be replaced without changing the tank. We work on electric storage systems from brands including Rheem, Dux, Rinnai, Vulcan and Thermann.
A job from September 2025: a home in the Inner West had no hot water. We found the fault and replaced the thermostat and heating element.
Who to call
| Call an electrician for | Call a plumber for |
|---|---|
No hot water because of an electrical fault | Leaks from the tank, pipes or valves |
Heating elements and thermostats | Relief valves and tempering valves |
Tripping safety switches and circuit breakers | Replacing the tank or the whole system |
Power supply, wiring and circuit upgrades | Water pressure and water supply problems |
Not sure which it is? Call us. If it's an electrical fault on an electric storage system, we'll quote the repair. If it's a plumbing problem, we'll tell you so you can call a plumber.
Prices
Electric hot water fault finding starts from $199 + GST. Once we know the fault, we quote the repair before we start.
| Electric hot water fault finding | from $199 + GST |
The price depends on which part has failed (an element, a thermostat or the circuit), how easy the system is to get to, and whether the wiring or safety switch needs upgrading. Replacing a failed element or thermostat usually costs far less than replacing the whole system.
Answered within 24 hours
Why Impulse
NSW Contractor Licence 389893C and $20 million public liability cover. Our director, Matthew Neil, supervises every job.
Our workmanship is covered by our warranty, and products and parts come with a 2 to 7 year manufacturer's warranty, depending on the product. Your rights under the Australian Consumer Law always apply.
Sydney homeowners rate us 5.0 on Google. Read our Google reviews.
Tell us what's happening and the brand of your system, and send a photo of its label if you can. We'll confirm the price before we start.
Phones answered 24/7
Answered within 24 hours
Yes, for the electrical parts. Elements, thermostats, wiring and circuits on electric systems need a licensed electrician in NSW. Leaks, valves and tank replacements are plumbing work.
Repeated tripping means there's a fault, often a failed element or a wiring problem. Leave it off and call us to find the cause.
If your system is on an off-peak supply, it only heats at certain times, so heavy use can run it out before it heats again. A failing element or thermostat can cause the same thing, and we can test both.
No. We repair the electrical side of electric storage systems. Replacing the tank is mainly plumbing work, so you'd need a licensed plumber for that. We don't work on heat pump, gas or solar hot water systems.
We're based in Strathfield and repair electric hot water systems across the Inner West and greater Sydney. Check the suburbs we cover.