Old rangehood replaced or a new one installed, with the wiring, ducting and venting to outside handled where access allows. Replacements from $199 + GST.
Phones answered 24/7
Answered within 24 hours
What we do
We replace old rangehoods and install new ones. Whether it's a straight swap or part of a new kitchen, Impulse Electrical Enterprise handles rangehood installation in Sydney, including the wiring and, where access allows, the ducting.
The simplest range hood installation is a straight swap. We remove your old rangehood and fit the new one in the same spot, reusing the existing ducting and power where they suit the new unit.
Adding a rangehood where there wasn't one? We install it and provide the power it needs, either a new power point or a hardwired connection, depending on the model.
We run ducting from the rangehood to outside through the wall or roof where access and the building allow. Roofing, core drilling, structural or fire-rated work may need a specialist trade, and we'll list it in your quote.
Canopy rangehoods mount on the wall, undermount rangehoods sit under a cabinet and integrated rangehoods are built into the cabinetry. We can recommend a model or install one you've bought. If you supply it, our workmanship warranty covers the installation, while the rangehood itself is covered through the place you bought it.
We installed a rangehood for a home in Liberty Grove.
March 2026
Choosing
A ducted rangehood draws steam, smoke and cooking smells through a duct to the outside air. A recirculating rangehood passes the air through filters and returns it to the kitchen, so its filters need regular cleaning or replacing.
A ducted rangehood is usually the better choice, as long as the duct can finish outside the house, not in the roof space or a wall cavity, where grease and moisture can build up. In an apartment where ducting isn't possible, a recirculating model may be the practical option.

Prices
Replacing a rangehood starts from $199 + GST. New ducting, power points and other work are quoted before we start.
| Rangehood replacement installation | from $199 + GST |
Your rangehood installation cost depends on whether it's a like-for-like swap or a new position, whether new ducting is needed and how far it has to run to get outside, whether you need a new power point or a hardwired connection, and whether the cabinetry needs changing first.
Answered within 24 hours
Why Impulse
NSW Contractor Licence 389893C and $20 million public liability cover. Our director, Matthew Neil, supervises every job.
We install rangehoods from brands including Westinghouse, Miele, Bosch, Smeg, Fisher & Paykel, Electrolux, Chef, ILVE and ASKO.
Our workmanship is covered by our warranty, and products and parts come with a 2 to 7 year manufacturer's warranty, depending on the product. Your rights under the Australian Consumer Law always apply.
Sydney homeowners rate us 5.0 on Google. Read our Google reviews.
Tell us the rangehood you've chosen and send a photo of your kitchen and the old one if you can. We'll confirm the price before we start.
Phones answered 24/7
Answered within 24 hours
Yes, if it's hardwired or needs a new power point. That work must be done by a licensed electrician in NSW. A plug-in rangehood can use a suitable existing power point.
Not the electrical side. In NSW, you can't do any electrical wiring yourself. The ducting and mounting also need to be done properly, so grease and moisture don't end up in your roof space or walls.
It depends on the model and your cooktop. The manufacturer's installation guide sets the minimum height above the cooktop, and we follow it when we install.
A straightforward replacement usually takes one to two hours. New ducting, a new power point or a new position takes longer.
We're based in Strathfield and handle rangehood installation in the Inner West and across greater Sydney. Check the suburbs we cover.