Available 24/7Available 24/7New, extra and moved power points, weatherproof outdoor points and replacements for burnt or damaged ones, installed and tested by licensed electricians. Free quotes, with a fixed price before we start.
New double power points from $357 + GST. Replacements from $223 + GST.
Phones answered 24/7
Answered within 24 hours
What we do
Whether you need one extra power point or a dozen for a renovation, Impulse Electrical Enterprise installs, moves and replaces power points in houses, units and workplaces across Sydney, and tests every one before we leave.
Double and quad power points, including USB-A and USB-C power points, added where you need them, so you're not relying on power boards and double adaptors.
Power points moved for a new kitchen layout, TV wall or desk, with the old point made safe and covered.
Weatherproof power points for patios, garages, sheds and pool equipment, with the cable protected along the way.
Cracked, loose, scorched or burnt power points replaced, and the wiring behind them checked and re-terminated where needed.
A new circuit from the switchboard for an air conditioner, oven or other high-power appliance, protected by a safety switch.
Quad and weatherproof power points for offices, shops and warehouses, planned around how the space is used.
Safety first
Call us if a power point:
If someone has had an electric shock, or there's a fire or smoke, call triple zero (000) first. If a power point is sparking, smells like burning or is hot, stop using it. If you can safely reach your switchboard, switch off the main switch, then call us. Don't touch anything that is scorched, melted or wet. For urgent faults after hours, see our emergency electrician service.
Good to know
In NSW, any electrical wiring work must be done by, or under the supervision of, a licensed electrician, and that includes installing, moving or replacing a power point. We hold NSW Contractor Licence 389893C, and every job is completed or supervised by a licensed electrician.
Adding, altering or even replacing a power point like for like needs a Certificate of Compliance for Electrical Work (CCEW), which we lodge with Building Commission NSW so you have a record of the work. The NSW Government's safety advice is not to stack plugs in a power point, as it can overload it and cause a fire, which is one good reason to add power points rather than power boards. It also recommends safety switches on all your circuits.
Prices
A new double power point starts from $357 + GST, and replacing an existing double power point starts from $223 + GST. These prices assume the wiring is accessible and in good condition, with a standard installation. Extra wiring, difficult access or fixing existing electrical faults can add to the cost.
We give you a fixed price in a free quote before any work starts.
| Job | Starting Price | |
|---|---|---|
| JobNew double power point installed | Starting PriceFrom $357 + GST | |
| JobExisting double power point replaced | Starting PriceFrom $223 + GST |
How many power points you need, and whether they're double, quad or weatherproof
How the cable gets there: wall and ceiling access, brick or plasterboard walls, single or double storey
Whether a new circuit is needed, and whether the switchboard has room and safety switch protection for it
Making good the old spot when a power point is moved
Whether the job is in a home, a rental or a workplace
A photo of the wall and of your switchboard helps us quote quickly.
Answered within 24 hours
How it works
Call or send an enquiry with how many power points you need and where. A photo of the wall and the switchboard helps.
We confirm the price in a free quote. If a new circuit or a switchboard change is needed, we tell you before we start.
We install and test every power point, cover the old spot if one was moved, and issue a Certificate of Compliance when the work requires one.
Recent jobs
A few recent power point jobs, from a burnt power point in a rental to new points in a warehouse.
We installed a quad power point on a mounting block and a double weatherproof power point in a warehouse, one of them to run a ceiling fan.
November 2026
We replaced two double power points in a rental home, one in the kitchen and one in the dining room. One had burnt out behind the wall, so we re-terminated its wiring.
October 2026
We installed a new double power point, moved another for easier use, and added a wired data point and a new NBN outlet with cabling.
October 2026
A wired weatherproof power point installed for outdoor use.
December 2025
Why Impulse
NSW Contractor Licence 389893C and $20 million public liability cover. Our director, Matthew Neil, supervises every job.
Our workmanship is covered by our warranty, and products and parts come with a 2 to 7 year manufacturer's warranty, depending on the product. Your rights under the Australian Consumer Law always apply.
Sydney customers rate us 5.0 on Google. Read our Google reviews.
Old switchboards replaced when there's no room for new circuits.
Learn More
Safety switches tested, replaced or added to protect your power points.
Learn More
Older homes rewired when the wiring behind the power points is past its best.
Learn MoreA new double power point starts from $357 + GST, and replacing an existing one starts from $223 + GST, assuming accessible wiring and a standard installation. Extra wiring, difficult access or fixing faults can add to the cost. We confirm a fixed price in a free quote before we start, and a photo of the wall and switchboard helps us quote quickly.
No. In NSW, electrical wiring work, including installing or replacing a power point, must be done by, or under the supervision of, a licensed electrician, and the work needs a Certificate of Compliance for Electrical Work.
Usually, yes. We check how the cable can get there, what's in the wall and whether the circuit and switchboard can take it, and tell you if a spot won't work and what we'd suggest instead.
Yes. We supply and install USB power points with USB-A and USB-C ports, either in place of an existing power point or as a new one.
Yes. We install weatherproof power points for patios, garages, sheds and pool equipment, with the cable protected along the way.
Yes. We go ahead once the landlord or agent has authorised the work, and we can arrange access with the tenant.
We're based in Strathfield and install power points across the Inner West and greater Sydney. Check the suburbs we cover.
Tell us how many power points you need and where, and send a photo of the wall and switchboard if you can. We'll give you a fixed price before any work starts.
Phones answered 24/7
Answered within 24 hours
From our blog
The warning signs of an electrical hazard at home, the safe way to switch off the power, what to do if there's fire or smoke, and how to check an electrician's licence.
Read Article
Sparks, smoke or a burning smell at home? What to do first, how to switch off the power safely, when to call 000 and what to note while you wait for an electrician.
Read Article
Calling an electrician about an electrical emergency? The details that help them come prepared: your address and access, what's happening, what you've already done and any safety risks.
Read Article