Impulse Electrical Enterprise homeAvailable 24/7

Safety Switch and RCD Testing in Sydney

Check your safety switches are working, find out why one keeps tripping, or add safety switches to circuits that don't have them. Testing is $99 + GST per safety switch, with a written report.

  • $99 + GST Per Switch
  • Written Safety Report
  • Licensed and Insured
  • Rated 5.0 on Google
Call 0481 228 836

Phones answered 24/7

Get a Free Quote

Answered within 24 hours

Why test

What a Safety Switch Does and Why You Should Test It

A safety switch, also called an RCD, watches the electricity flowing through your circuits. If it detects electricity leaking, for example through a person, it cuts the power in a fraction of a second, which protects against serious electric shock. The catch is that safety switches can stop working without you knowing.

The NSW Government advises pressing the test button on each one at least every six months. For a proper check, Impulse Electrical Enterprise offers RCD testing in Sydney homes. Our safety switch testing is carried out by a licensed electrician.

An Impulse Electrical Enterprise electrician testing a switchboard

What we do

Our Safety Switch Testing Service

When we test, we check each safety switch on your switchboard, tell you which ones are working and give you a written electrical safety inspection report. If one fails, we can usually replace it on the same visit once you've approved the price. If some of your circuits have no safety switch at all, we can add one. For older boards, safety switch installation is often done as part of a switchboard upgrade.

Safety switch testing$99 + GST per safety switch
  • Prices assume reasonable access to your switchboard.
  • You get a written electrical safety inspection report.
  • Replacement safety switches and any extra work are quoted separately, and only go ahead once you approve.
  • Your final price is confirmed before we start.
Get a Free Quote

Answered within 24 hours

Troubleshooting

Why Does My Safety Switch Keep Tripping?

A safety switch that keeps tripping has usually found a fault, typically a faulty appliance or a problem with the wiring. It's doing its job, so don't try to force it back on. Here's what you can safely try:

If the switch still won't reset, or it trips with nothing plugged in, the fault is likely in the wiring. Leave it off and call a licensed electrician. If you're without power, our emergency electrician phones are answered 24/7.

  • Switch off and unplug every appliance on that circuit.
  • Reset the safety switch.
  • Plug the appliances back in one at a time. If the switch trips again, the last appliance you plugged in is likely the faulty one.

Rental properties

Safety Switch and Smoke Alarm Checks for Rental Properties

We test safety switches and smoke alarms for landlords and property managers on request. In NSW, the condition report at the start of a tenancy records whether the property has a safety switch and whether it's working, and a faulty safety switch is treated as an urgent repair. We contact the tenant directly to arrange access, so you don't have to coordinate the visit.

  • Smoke Alarm Testing and Replacement

    We supply and install smoke alarms and test the ones you already have. Hardwired smoke alarms must be installed or replaced by a licensed electrician, so it's not a DIY job. NSW landlords also need to check every year that smoke alarms are working, and we can do that check while we test your safety switches.

Recent jobs

Recent Safety Switch Jobs

A few recent jobs where we added, upgraded or checked safety protection.

  • Circuit Breaker Upgraded to a Safety Switch in Five Dock

    We upgraded an old circuit breaker to a safety switch, and also installed a new ceiling fan with a light and a quad power point.

    March 2026

  • Switchboard Safety Upgrade in Kensington

    We fitted RCBO safety switches, improved the lighting and checked every circuit was protected and labelled.

    June 2026

  • Earthing and Safety Switch Upgrade in Glenorie

    We installed a new earth electrode, replaced a double power point and upgraded to a safety switch.

    January 2026

  • Smoke Alarm Replaced

    We replaced an old smoke alarm with a new one and tested it to make sure it works.

    December 2025

Why Impulse

Why Sydney Homeowners Choose Us

  • Licensed and Insured

    NSW Contractor Licence 389893C and $20 million public liability cover. Our director, Matthew Neil, supervises every job.

  • Warranty-Backed Work

    Our workmanship is covered by our warranty, and products and parts come with a 2 to 7 year manufacturer's warranty, depending on the product. Your rights under the Australian Consumer Law always apply.

  • Rated 5.0 on Google

    Sydney homeowners rate us 5.0 on Google. Read our Google reviews.

Book Your Safety Switch Test Today

Tell us how many safety switches you have, or send a photo of your switchboard, and we'll confirm the price before we start.

Call 0481 228 836

Phones answered 24/7

Get a Free Quote

Answered within 24 hours

Safety Switch and RCD Testing Questions

The NSW Government advises pressing the test button on each safety switch at least every six months. It's also worth having an electrician test them, especially if they're old or have never been checked.

Testing costs $99 + GST per safety switch, and you get a written electrical safety inspection report. If a switch needs replacing, we quote it before any work is done.

Yes. Press the test button on each safety switch and it should turn the power off straight away. If it doesn't, call a licensed electrician. Our test checks every switch on the board and comes with a written report.

We tell you straight away and quote a replacement. Once you approve it, we can usually replace the switch on the same visit. If your switchboard is old and has few safety switches, an upgrade may be the better option.

We're based in Strathfield and test safety switches across the Inner West and greater Sydney. Check the suburbs we cover.