Impulse Electrical Enterprise homeAvailable 24/7

Switchboard Upgrades in Sydney With a Fixed Price Upfront

Replace an old fuse box or an overloaded switchboard with a modern board and safety switches. We agree a fixed price before we start and handle the network paperwork for you.

  • Fixed Price Before We Start
  • Network Paperwork Handled
  • Licensed and Insured
  • Rated 5.0 on Google

Switchboard upgrades from $1,200 + GST

Call 0481 228 836

Phones answered 24/7

Get a Free Quote

Answered within 24 hours

Is it time?

Signs Your Switchboard Needs an Upgrade

Many older Sydney homes still run on switchboards that were built for a fridge, a kettle and a few lights, not for air conditioning, induction cooking or an electric car. A switchboard upgrade in Sydney makes your home safer and gives it room to grow. At Impulse Electrical Enterprise, these are the signs we look for:

  • Your switchboard still has old ceramic fuses, or it's an old fuse box.
  • There are no safety switches, or only one covering the whole home.
  • Your safety switch keeps tripping and won't stay on.
  • You can see scorch marks, smell burning or hear buzzing at the board.
  • Lights flicker or dim when a big appliance turns on.
  • You're planning an EV charger, solar, a battery, an induction cooktop or ducted air conditioning.
  • You're renovating, or buying or selling an older home.
Switchboard with its cover off while the safety switch was replaced in Burwood, by Impulse Electrical Enterprise

What you get

What's Included in a Switchboard Upgrade

A switchboard replacement is more than a new box on the wall. Every standard upgrade we do includes the following, so you know exactly what you're paying for.

  • A new switchboard in a compliant enclosure, sized for your home's needs
  • Safety switches (RCDs) protecting all your circuits, as the wiring rules require when a switchboard is replaced
  • New circuit breakers, with every circuit clearly labelled
  • Quality parts from brands including Hager, Clipsal, Schneider Electric, ABB, NHP and Voltex
  • Full testing before the power goes back on
  • A Certificate of Compliance for Electrical Work (CCEW) for your records
  • The network paperwork (Ausgrid or Endeavour Energy) arranged by us, plus any Level 2 work your upgrade needs, organised by us with its cost shown in your quote, so you only deal with one company

Prices

How Much Does a Switchboard Upgrade Cost in Sydney?

Switchboard upgrades start from $1,200 + GST. Most jobs fall into one of the three ranges below, and we confirm your price in a free, fixed quote before any work starts.

Type of upgradeFull board replacementWhat it usually coversA new board with safety switches and circuit breakers, plus the network notificationTypical price$1,200 to $4,000+ + GST
Type of upgradeExpanded capacity, solar and EV readyWhat it usually coversA larger board with room for solar, a battery or an EV chargerTypical price$4,000 to $7,000+ + GST
Type of upgradeThree phase upgrade and relocationWhat it usually coversMoving to three phase power or moving the board to a new spotTypical price$7,000 to $11,000+ + GST

What Affects the Price

Your switchboard upgrade cost depends mostly on how many circuits your home has and how many safety switches they need. Moving the board to a new spot adds work, and so does building in room for solar, a battery or an EV charger. If you're planning heavy loads such as a 22 kW charger, you may need three phase power, which sits in the top price range.

  • Prices assume suitable existing wiring and reasonable access to the board.
  • Extra equipment, new circuits and other work are quoted separately.
  • For a relocation, network, metering provider and Level 2 costs may apply if the meter or connection has to move, and your written quote states which of these it includes.
  • Your final price is confirmed in a free, fixed quote before we start.
Get a Free Quote

Answered within 24 hours

How it works

What to Expect With Your Switchboard Upgrade

  1. Step 1:

    Quote

    We look at your board, talk through what you want to run now and in future, and give you a fixed price before anything is booked.

  2. Step 2:

    Booking

    We book a day that suits you and tell you in advance when the power will go off. For a typical home, it's off for about three hours to a full day, depending on the work.

  3. Step 3:

    Installation

    We remove the old board and install the new one with safety switches protecting your circuits. Every circuit is clearly labelled, so you know what's what.

  4. Step 4:

    Testing

    Before the power goes back on, we test every circuit to make sure the new board and its safety switches are working as they should.

  5. Step 5:

    Paperwork

    You get your Certificate of Compliance for Electrical Work (CCEW), and we take care of the network paperwork, so there's nothing for you to chase.

Recent jobs

Recent Switchboard Upgrades

A few recent switchboard upgrades from around Sydney.

  • New Hager sub board with labelled circuits in Dulwich Hill, by Impulse Electrical Enterprise

    New Hager Sub Board in Dulwich Hill

    We installed a new Hager sub board with clearly labelled circuits, and added a new weatherproof double power point.

    July 2026

  • Upgraded switchboard in its new position on a brick wall in Leichhardt, by Impulse Electrical Enterprise

    Switchboard Upgraded and Moved in Leichhardt

    We upgraded this switchboard and moved it to a spot with better access. The new board has more capacity, and every circuit is clearly labelled.

    June 2026

  • Ready for Solar and an EV Charger

    This home was moving off gas, so we built a custom switchboard, upgraded the incoming supply and arranged new metering. It's now ready for solar and an EV charger.

    May 2026

  • Old, Crowded Switchboard Replaced

    An old board with outdated breakers, mixed brands and messy wiring, replaced with a compliant board: clean, labelled wiring, modern safety switches and spare capacity.

    November 2025

Why Impulse

Why Sydney Homeowners Choose Us for Switchboard Upgrades

  • Licensed and Insured

    NSW Contractor Licence 389893C and $20 million public liability cover. Our director, Matthew Neil, supervises every job.

  • One Company From Start to Finish

    You deal only with us. We arrange any Level 2 work and the network paperwork as part of your upgrade.

  • Warranty-Backed Work

    Our workmanship is covered by our warranty, and products and parts come with a 2 to 7 year manufacturer's warranty, depending on the product. Your rights under the Australian Consumer Law always apply.

  • Rated 5.0 on Google

    Sydney homeowners rate us 5.0 on Google. Read our Google reviews.

Ready to Upgrade Your Switchboard? Get a Fixed Price

Tell us about your switchboard and what you'd like to add, such as solar or an EV charger. We'll give you a free quote with a fixed price before any work starts.

Call 0481 228 836

Phones answered 24/7

Get a Free Quote

Answered within 24 hours

Switchboard Upgrade Questions

Often, yes. If your board is old, full or has no room for new circuits and safety switches, it will need upgrading before an EV charger, solar or a battery can be added safely. We check your switchboard when we quote and tell you straight away whether it needs an upgrade.

Yes. We take care of the network paperwork, whether your home is supplied by Ausgrid or Endeavour Energy, and organise any Level 2 work your upgrade needs, so there's no one else for you to coordinate. Your written quote states which network, metering provider or Level 2 costs it includes.

Yes. You receive a Certificate of Compliance for Electrical Work (CCEW), the official record that the work meets NSW requirements. Keep it with your home's paperwork for your insurer or a future sale.

Yes. We handle switchboard repairs such as burnt connections, loose wiring and circuits that keep tripping. If your board is unsafe or past repair, we'll quote an upgrade for you to approve. If the fault can't wait, call our emergency electrician line any time.

Some older switchboards are mounted on a backing panel that contains asbestos. If we find one, you can engage your own appropriately licensed asbestos removalist, or we can help coordinate a suitable specialist. We'll explain your options before any work starts. Don't drill, cut or otherwise disturb a backing panel that may contain asbestos.

We're based in Strathfield and upgrade switchboards across the Inner West and greater Sydney. Check the suburbs we cover.