Impulse Electrical Enterprise homeAvailable 24/7

Our work

Recent Electrical Jobs Across Sydney

Page 4 of 9. Newest jobs first.

We're licensed and insured, and our director, Matthew Neil, supervises every job.

Get a Free Quote

Answered within 24 hours

Recent jobs

Browse Our Recent Jobs

Newest first. Choose a service or an area to narrow the list.

Showing jobs 73–96 of 204

  • A customer in a Homebush unit drilled into a cable and switched the circuit off. We repaired the damaged cable, then came back to upgrade the switchboard and cover the hole with a blank plate.

  • A power point in an Enmore home had come off a crumbly brick wall. We replaced it and its mounting block, secured it to the fragile wall and filled the gap around it.

  • We upgraded the switchboard at an Annandale property. Testing then showed the oven light was tripping a circuit, so we replaced its globe and changed three more breakers to RCBO safety switches.

  • Hikvision security camera mounted under the eave of a Castle Hill home, by Impulse Electrical Enterprise

    Three 180 degree 6MP cameras and a 360 degree turret camera, a 6-channel AI recorder with 2TB of storage, a Hikvision video intercom doorbell and monitor, and app setup.

  • In a Strathfield apartment, we installed four DC ceiling fans in place of oyster lights and replaced seven power points and six light switches in one day.

  • A North Ryde customer wanted an EV charger at home. We installed an Evnex EV charger at the home.

  • In a Strathfield unit, we installed a Fantech exhaust fan in the bathroom, ran 150 mm ducting with splitters out to a new vent, and fitted four flush LED downlights.

  • A tenant in an Abbotsford rental saw sparks when plugging in a heater. The heater plug was burnt, so we re-terminated the wiring, fitted a new double power point and cut the plug off the heater.

  • During a visit to a Strathfield rental unit, our technician found many cables burnt, corroded and breaking apart. With the owner's approval, we replaced the old fuse box with a new sub-board and replaced the upright oven.

  • Outdoor heat strip mounted on a patio beam in Haberfield, by Impulse Electrical Enterprise

    A new weatherproof light switch with new cabling, and a dedicated circuit from the switchboard for the customer's own heat strip, fully tested.

  • Heated towel rail with a timer panel in a North Strathfield bathroom, by Impulse Electrical Enterprise

    A new main switch, an energy meter on two circuits, the customer's energy monitor wired in, and a heated towel rail with a timer installed.

  • We replaced the ensuite exhaust fan in a Burwood rental unit. The light switch's terminals were broken, so we replaced it too and mounted it on a mounting block on the brick wall.

  • We replaced two exhaust fans at a Croydon home, replaced a switch and fitted a run-off timer so the fan keeps running for about 12 minutes, then hung a pendant light the customer supplied.

  • Green LED neon flex along a Burwood building frontage, with the Impulse Electrical van, by Impulse Electrical Enterprise

    We replaced 30 metres of LED neon flex on a building frontage and replaced the LED driver where required.

  • Customer-supplied EV charger mounted on a garage wall in Burwood, by Impulse Electrical Enterprise

    A single phase installation of a charger the customer had bought, with 6 mm² dedicated cable, an RCBO safety switch, an enclosure, an isolator and certification.

  • In a Balmain apartment, we upgraded the sub-board, wired two new power points including a 15 A outlet, fitted two quad power points, and replaced a ceiling fan, a switch and two downlights.

  • Close-up of an amber glass statement chandelier in Newtown, by Impulse Electrical Enterprise

    We mounted, aligned and connected a statement chandelier.

  • New inline exhaust fan and ducting in the ceiling space of a Sydney Olympic Park home, by Impulse Electrical Enterprise

    We replaced an exhaust fan with an inline fan, altered the existing ducting and added new ducting. We also installed a double power point and a free-to-air TV point with concealed cabling.

  • Three phase EV charger on a garage wall in Concord, by Impulse Electrical Enterprise

    A dedicated three phase circuit with a three phase RCBO and isolator. We installed and programmed the customer's own charger and certified the work.

  • A single phase EV charger on dedicated 6 mm² cable, with an RCBO safety switch and an isolator. We installed, programmed and certified the customer's own charger.

  • Three phase EV charger with an isolator and conduit in a Newtown garage, by Impulse Electrical Enterprise

    A three phase circuit with an RCBO safety switch and isolator, with the customer's charger installed and programmed.

  • A Concord customer asked for an EV charger in the garage of their home. We installed the EV charger and added surge protection.

  • At a Ryde home, we upgraded the switchboard, replaced three underfloor ventilation fan motors, removed the extension leads they ran on, and put the fans on timers with a switch to run them manually.

  • Single phase EV charger with an isolator on a weatherboard wall in Leichhardt, by Impulse Electrical Enterprise

    A single phase EV charger with an RCBO safety switch, an enclosure and an isolator, tested and certified.

Need an Electrician for a Job Like These?

Call 0481 228 836 any time. Phones are answered 24/7, and you get a free, fixed-price quote before any work starts.

Call 0481 228 836

Phones answered 24/7

Get a Free Quote

Answered within 24 hours